FluidFlow Foundations IV - Slurry Module

    249.00 € 249.00 € 249.0 EUR

    249.00 €

    This combination does not exist.

    ENROLL

    Self-Paced Course
    3 modules
    James McLoone, CEng
    Flite Software NI Ltd
    SPC341


    Course Objective

    "To provide a fast and solid learning curve for FluidFlow users that utilize the Slurry Module, allowing them to become confident users in an optimum timeframe." 

    Learn from home
    100% online training

    Video lectures by experts
    watch multiple times

    Available 24/7
    1-year unlimited access

    Personal Certificate

    prove your knowledge

    About the course


       Self-paced

       3 modules

       ~3 hrs of videos

       English

       1-yr access

       SPC341

    This course covers the fundamentals of the Slurry Module of the FluidFlow software. By means of video lectures, tutorials and case discussions you will become confident with using the analysis techniques for slurries in different applications. Topics include the calculation settings and slurry medium properties, flow regimes, particle size distribution, design procedures, and many real-life case discussions. A large set of video tutorials provide a clear learning curve and allow you to get fully up to speed on working with the software.

    After this course you will be confident in using the FluidFlow Slurry Module and understand the important calculation and gas properties settings.

    The course allows you to learn at your own pace and is fully provided online. You receive 1-year unlimited access to all modules, which allows you to perform them over again when you need to refresh knowledge for your work projects.

    Questions? Contact us

      sales@engineeringtrainer.com

       +31 (0)85 058 0051
           Monday - Friday, 9am - 6pm CEST

    Meet your instructors


    James McLoone, CEng

    Global Engineering Project Manager, Flite Software NI Ltd


    FluidFlow, Pipe Flow, Slurry Flow, Heat Transfer


    Program & Details


    1. Welcome & Your instructor

    2. Content Overview

    3. How to use this course

    4. Personal Certificate requirements

    5. Questions Forum

    1. Slurries: non-Newtonian flow

    2. Design exercise 1: Bingham Plastic

    3. Design exercise 2: pumped mineral slurry

    1. Settling slurry: Introduction

    2. Settling slurry: Flow regimes

    3. Settling slurry: Modeling

    4. FluidFlow settling slurry correlations

    5. Particle Size Distribution (PSD) curve

    6. Configuring FluidFlow for slurry simulations

    1. Slurry systems Design Procedure

    2. Design exercise 1: Vertical pipe

    3. Design exercise 2: Vertical pipe 2

    4. Design exercise 3: King example

    5. Design exercise 4: WASC example

    6. Design exercise 5: 8700 M slurry pipe

    1. Congratulations

    2. Course evaluation survey

    3. Your Personal Certificate

    4. Rate this course

    5. Related resources

    6. Follow up

    Results

    After this course, you... 

    • have a basic understanding of flow theory and concepts for slurries,

    • are able to work with slurries in FluidFlow,

    • can manage the required calculation settings and properties for slurry flow calculations,

    • have seen numerous example cases and discussions in FluidFlow. 

    Who should attend this course

    • Those using the Slurry Module in FluidFlow,

    • Beginner and intermediate FluidFlow users.

    Prerequisites: 
    Successful completion of the course “FluidFlow Foundations I – Liquid Module” is beneficial

    Level: Intermediate

    Access to the course. 
    After your purchase is confirmed it will be activated to your account on the EngineeringTrainer learning portal. Here you will find the course in your dashboard and you will be guided step-by-step through the different course modules. You receive 1-year unlimited access to the course. This allows you to perform modules again when you need to refresh knowledge for your work projects.

    Learn by doing.
    The course is mainly based on video content: video lectures and video software demonstrations. English subtitles are available and videos can be viewed as many times as desired. The video lectures help you to grasp the important technical concepts and in the video demonstrations the instructor uses the software and discusses all the steps and actions. You are recommended to follow the steps of the instructor in the software to optimize your learning curve.

    Software models associated with the demonstrations are available for download.

    This course is self-paced and is not subject to specific dates. The course contains 3 modules with a total of 2:45 hours of content which can be performed at your own pace. A Personal Certificate will be provided to participants if they finish the course within the first month after purchase. This incentive will motivate you to perform the course quickly thereby improving your learning curve.

    You receive 1-year unlimited access to all modules. This allows you to perform modules again when you need to refresh knowledge for your work projects.

    A personal digital certificate will be provided to participants if they finish the course within the first month after purchase. This incentive will motivate you to perform the course quickly thereby improving your learning curve.

    Example Certificate:

    Example Certificate of Completion

    FAQ

    • Video lectures

    • Video demonstrations

    • FluidFlow model files for download

    The majority of training material are videos. These are not available for download, but can be accessed directly with your account on the portal. Software models associated with the demonstrations are available for download.

     You receive 1-year unlimited access to the course. This allows you to perform modules again when you need to refresh knowledge for your work projects.

    We encourage participants to submit feedback and questions in the Questions forum of the course. These form the basis for new videos that are added to the online course on a regular basis.

    Participants receive 1-year unlimited access to the course including new videos that are added during this year. Participants receive an email notification upon addition of new course videos.

    If you do not have access to the FluidFlow software through your employer you are invited to download a 14-day free trial which can be utilized for this course.

    Yes, this course qualifies for PDH hours as per the NCEES CPC Guidelines.

    Start immediately

    Require company payment?

    Want team access?

    Share with colleagues

    Related Courses


    Videos on YouTube


    Subscribe & Follow

             

    Questions? Contact us


    Training Coordinator & Engineer Luuk Hennen, MSc

    Luuk Hennen    
    Product Coordinator

      sales@engineeringtrainer.com

       +31 (0)85 058 0051
            Monday - Friday, 9am-6pm CEST